Example 7: Grouping Inputs And Outputs - Extron electronics DXP DVI Pro User Manual

Example 7: Grouping Inputs and Outputs

In the following example, several switcher inputs and outputs are assigned to groups. The
steps show the front panel indications that result from your action.
1. Press and release the Esc
Press the Esc button to clear all
ENTER
Figure 46.
2. To enter I/O group mode, press and hold the Input 1 and Output 1 buttons until all
buttons that are not grouped light green (approximately 2 seconds).
1
Press and hold
the Input 1 and
Output 1 buttons.
1
Figure 47.
3. Press and release the Enter button to select group 1.
Press and release the Enter button to select group 1.
The button lights to indicate the selection.
Group #:
Figure 48.
4. Press and release the desired input and output buttons.
Press and release the Input 1 through Input 4 buttons.
The selected buttons light.
1
Press and release the Output 1 through Output 4 buttons.
The selected buttons light.
1
Figure 49.
>
button.
selections.
C O N T R O L
VIEW ESC
PRESET
The button blinks once.
Clear All Selections
INPUTS
2 3 4 5 6 7
2 3 4 5 6 7
OUTPUTS
Select I/O Group Mode
C O N T R O L
VIEW ESC
PRESET
ENTER
1 2 3 4
Select I/O Group 1
INPUTS
2 3 4 5 6 7 8
2 3 4 5 6 7 8
OUTPUTS
Assign Inputs and Outputs to Group 1
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
8
1 2 3
2 seconds
8 1 2 3
DXP DVI Pro and DXP HDMI Series • Operation
INPUTS
4 5 6 7 8
4 5 6 7 8
OUTPUTS
34