Extron electronics DXP DVI Pro User Manual page 36

6. Press and release the Video button to toggle it to green and the Audio button to
toggle it to either unlit or background-illuminated.
Press the Video button
to select it.
The button lights green
when selected.
The output buttons for outputs that are tied to input 5 light
green to indicate video ties (audio breakaway).
1 2 3 4
The output buttons for outputs that are not tied to input 5
are either unlit or background illuminated.
Figure 34. Deselect Audio and Select Video to View Only Video Ties
If video ties are established for input 5, the output buttons light green for all video
outputs tied to input 5. If no ties are established for input 5, all output buttons return to
either unlit or background illumination.
7. Press and release the View
Press the View button
to exit view-only mode.
All input buttons and output buttons
VIEW
return to unlit or background illumination.
The View button returns to unlit
or background illumination.
Figure 35. Press the View
NOTE: You can also view a set of ties by selecting a tied output. To demonstrate
this:
1.
Note the number of a lit output button.
2. Press and release the unlit or background-illuminated button for an untied
output. Observe that the buttons for all of the untied outputs light.
3. Press the output button that you noted previously and observe that the
selected output button, the tied input button (input 5), and the output
buttons light for all of the outputs that are tied to the input.
Press the Audio
I / O
button to deselect it.
The button is unlit
VIDEO AUDIO
or background
illuminated when
deselected.
5 6 7 8
OUTPUTS
<
button to exit view-only mode.
<
Button to Exit View-only Mode
DXP DVI Pro and DXP HDMI Series • Operation 28