Extron electronics DXP DVI Pro User Manual page 95

Setting the mail server domain name
The Mail Server Domain Name field displays the domain name that the DXP switcher
uses to log on to the e-mail server. Standard domain conventions (such as
apply.
NOTES:
• The following characters are invalid or not recommended in a domain name:
+ ~ , = ` [ ] { } < > ' ' " " ; : | \ ? and {space}.
•
The @ character is acceptable only as the lead-in to the domain name (such as
@folklore.net).
Edit the Mail Server Domain Name field as follows:
1. Click in the Mail Server Domain Name field. The graphic cursor becomes a text
cursor.
2. Edit the name as desired.
3. Press the <Tab> key on the keyboard or click in another field to exit the Mail Server
Domain Name field.
4. Click the Take button for the name change to take effect.
Entering e-mail addressee information
The eight E-mail Addressee fields permit the administrator to identify the e-mail
addresses of the personnel to whom the DXP switcher e-mails notification of its failure and
repair status. Figure 81 shows a typical e-mail from the switcher.
DXP-DVI/HDMI-05-8E-15 - Power Supply Fixed
DXP-DVI/HDMI-05-8E-15@folklore.com
To: Charley Adams
Thu. 11 May 2010 13.02.37
Unit Name = DXP-DVI/HDMI-05-8E-15
Unit IP Address = 100.25.112.9
Figure 81. Typical DXP E-mail
The radio buttons and check boxes associated with each address field permit the
administrator to specify specific e-mail requirements for each recipient.
Edit these fields and controls as follows:
1. Click in the desired E-mail Addressee field. The graphic cursor becomes a text
cursor.
2. Edit the e-mail address as desired. Standard e-mail address conventions
(such as @ .com) apply.
xxxxx xxx
3. Press the <Tab> key on the keyboard or click in another field to exit the e-mail
addressee field.
4. Use the checkboxes associated with each addressee to select the options about which
the addressee will be e-mailed: missing inputs or power supply.
DXP DVI Pro and DXP HDMI Series • Matrix Software
@ .com)
xxxxx xxx
87