Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 1; Switching From Lock Mode 1 To Lock Mode 0 - Extron electronics DXP DVI Pro User Manual

Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode 0
NOTE: If the switcher is in lock mode 0 or mode 1, this procedure selects mode 2.
If the switcher is in lock mode 2, this procedure selects mode 0 (unlocks the switcher).
Toggle the lock on and off by pressing and holding the Enter, Video, and Audio buttons
simultaneously until the following buttons blink twice (approximately 2 seconds).
• The Esc
• The Video and Audio buttons blink if the DXP is now in lock mode 0.
Press and hold the Enter, Video, and Audio
buttons simultaneously to enable lock mode 2 or to
toggle between mode 2 and mode 0.
ENTER
Figure 58.

Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode 1

NOTE: If the switcher is in lock mode 0 or mode 1, this procedure selects mode 2.
If the switcher is in lock mode 2, this procedure selects mode 1.
Toggle the lock on and off by pressing and holding the Video and Audio buttons until the
following buttons blink twice (approximately 2 seconds).
• The Esc
• The Video and Audio buttons blink if the DXP is now in lock mode 1.
Press and hold the Video and Audio buttons
simultaneously to enable lock mode 2 or to
toggle between mode 1 and mode 2.
I / O
VIDEO AUDIO
Figure 59.

Switching from Lock Mode 1 to Lock Mode 0

If the switcher is in lock mode 1, you cannot change it directly to lock mode 0 (completely
unlocked. You must first place the switcher in lock mode 2, then toggle it to mode 0 (see
Selecting Lock Mode 2 or Toggling Between Mode 2 and Mode
>
, Video, and Audio buttons blink if the DXP is now in lock mode 2.
I / O
2 seconds
VIDEO AUDIO
ESC
>
Toggle Front Panel Lock Between Mode 2 and Mode 0
>
, Video, and Audio buttons blink if the DXP is now in lock mode 2.
2 seconds
VIDEO
ESC
>
Toggle Front Panel Lock Between Mode 2 and Mode 1
DXP DVI Pro and DXP HDMI Series • Operation
The Esc, Video, and Audio buttons
blink twice to indicate mode 2.
I / O
The Video and Audio buttons blink
twice to indicate mode 0.
VIDEO AUDIO
Release the buttons.
The Esc, Video, and Audio buttons
blink twice to indicate mode 2.
I / O
The Video and Audio buttons blink
twice to indicate mode 1.
AUDIO
Release the buttons.
1).
39