Extron electronics DXP DVI Pro User Manual page 126

e. On the next screen, fill in the required information, then click the Download
product name_firmware version.exe button.
f.
In the File Download – Security Warning window, click Save.
g. In the Save As window, browse to the folder where you want to save the firmware
file, and click Save. The firmware installation file is placed on your computer hard
drive.
2. Access the DXP web pages.
3. Select the Configuration tab.
4. On the Configuration page, click the Firmware Upgrade link on the left side.
5. Click the Browse button. A Choose File to Upload window opens.
6.
Navigate to the folder where you saved the firmware upgrade file and select the file.
Figure 115. Choose File Window with a Firmware File Selected
ATTENTION:
• Valid firmware files must have the file extension .S19. Any other file extension is
not a firmware upgrade. Uploading files with a different extension could cause
the DXP to stop functioning.
• Les fichiers firmware valides doivent contenir l'extension fichier .S19. Les
fichiers valides de firmware doivent avoir l'extension fichier .s19 pour les cartes
E/S et .eff pour le châssis. Un fichier avec n'importe quelle autre extension n'est
pas une mise à jour de firmware pour cet appareil et l'appareil pourrait arrêter
de fonctionner.
NOTE: The original factory-installed firmware is permanently available on the DXP
switcher. If the attempted firmware upload fails for any reason, the DXP reverts to
the factory-installed firmware.
7. Click Open.
8. On the Firmware Upgrade page, click the Upload button.
While the firmware is uploading, the Upload button changes to Uploading... .
•
When the uploading process is complete, the button changes back to Upload.
•
The uploading may take a few minutes.
•
DXP DVI Pro and DXP HDMI Series • HTML Operation 118