Extron electronics DXP DVI Pro User Manual page 29

3. Press and release the Input 5 button.
Press and release the Input 5 button.
The button lights amber.
INPUTS
5
1 2 3 4
Figure 14. Select Input 5
4. Press and release the Output 3, Output 4, and Output 8 buttons.
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink amber to indicate that the selected RGBHV or video and audio
input will be tied to these outputs.
1 2 4
3
17 18 19 20 21 22 23 24
Figure 15. Select the Outputs
NOTE: You can cancel the entire set of ties at this point by pressing and releasing
>
the Esc button. The Esc
5. Press and release the Enter button.
Press the Enter button to
confirm the configuration
change.
All input and output buttons
become unlit or return to
ENTER
background illumination.
The Enter button
becomes unlit or returns to
background illumination.
Figure 16. Press Enter to Confirm the Tie
The configuration now is input 5 video and audio tied to output 3, output 4, and
output 8.
Figure 17. Example 1, Final Configuration
6 7 8
O
5 6 7
3
U
ENTER
T
P
U
T
The Enter button blinks
S
green to indicate the need to
confirm the change.
>
button blink red once.
DXP DVI Pro and DXP HDMI Series • Operation
C O N T R O L
VIEW ESC
PRESET
21