Table of Contents
Advertisement
Operator's Manual
Operating Instructions
ENTERING THE MACHINE
Entering the cab
CAUTION
Always make sure that your hands and shoe
soles are clean and dry before getting into the
driving cab. Always face the machine when
entering and leaving it and hold to the suitable
handles.
The handler cab is equipped with an access door
on the left-hand side.
Door opening from outside:
• Insert the key and release
lock 1.
• Press the pushbutton 1 and
open the door.
Door closing from inside:
Pull the door with force: it locks automatically.
Door opening from inside:
•
Lower lever 2 and
release the lock to open the
door completely.
•
Rotate handle 3 to
open the upper section of the
door and lock it against the
special catch.
CAUTION
The upper section of the door must be secured
to the rear part of the driving cab or latched to
the lower section of the same door.
76
GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
To unlock the door latched in open position:
•
unlock the door from the catch
•
close the upper section of the
door by means of handle 3.
Leaving the cab in an emergency
In an emergency, use the rear
window of the cab as safety
exit-way.
This window has special
locking handles with plastic
pins 5 easy to pull out when
you need to fully open the
glass.
First Edition - Second Printing
Press button 4
to
Once released, re-
Part No. 57.0009.0540
Courtesy of Crane.Market
Advertisement
Table of Contents
