Operator's Manual
Operating Instructions
ROAD OR SITE TRANSFER
When travelling on public roads, strictly obey the
local or national road traffic regulations.
Besides, take into account the following general
precautions:
•
Start the engine.
•
Align the rear wheels.
•
Sway the machine.
•
Only for the italian market install the locking
devices provided for the machine registration
document as follows:
1. install the boom extension locking cable A;
2. install the locking collar B on the tilting cylinder;
3. install the locking collar C on the lifting cylinder;
4. install the locking chain D on the outriggers arms.
5. Cover the teeth of the conventional forks with
the special guard; or withdraw the floating forks.
NOTICE
W i t h t h e f l o a t i n g
forks pitched back,
do not move the fork
pitching cylinder as
the machine could
suffer from damage.
•
Retract the boom and the attachment to
transfer position.
•
Set the Road/Jobsite switch to "ROAD".
•
Make sure that lights, horn and turn signals
are in working order.
•
Engage the gear.
•
The transfer speed of the vehicle will depend
on the engine rpm and the position of the control
lever.
90
GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
First Edition - Second Printing
NOTICE
Public road circulation is allowed only for
transferring an unloaded machine.
Do not use the machine to tow trailers.
ONLY FOR THE ITALIAN MARKET
A
C
B
D
Part No. 57.0009.0540
Courtesy of Crane.Market