Overload Test Procedure - Genie GTH-4013 SX Operator's Manual

First Edition - Second Printing Operator's Manual
Test

OVERLOAD TEST PROCEDURE

Telehandler coupled to attachments with fixed centre of load (Forks, Bucket, Clamps):
1,33 x Q
Ref. Standard EN1459
Q = Nominal Rated Load Capacity
Telehandler coupled to attachments with oscillating centre of load (Hook, Jib, Hoist):
1,33 x Q + 0,1 x Fb on tires
1,25 x Q + 0,1 x Fb on outriggers
Ref. Standard EN13000
Q = Nominal Rated Load Capacity
Fb = Boom weight reduced (i.e. equal overturning moment) at boom tip.
Part No. 57.0009.0540 GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX 219
Courtesy of Crane.Market