Table of Contents
Advertisement
Operator's Manual
Safety Precautions
•
When entering/leaving the cab or other raised
parts, always face the machine; never turn the
back.
•
When carrying out operations at hazardous
heights (over 1.5 meters from the ground), always
use approved fall restraint or fall arrest devices.
•
Do not enter/leave the machine while it is running.
•
Do not leave the driving place when the machine
is running.
•
Neither stop nor carry out interventions under
or between the machine wheels when engine
is running. When maintenance in this area is
required, stop the engine.
•
Do not carry out maintenance or repair works
without a sufficient lighting.
•
When using the machine lights, the beam should
be oriented in order not to blind the personnel at
work.
•
Before applying voltage to electric cables or
components, check their connection and proper
functioning.
•
Do not carry out interventions on electric
components with voltage over 48V.
•
Do not connect wet plugs or sockets.
•
Plates and hazard warning stickers shall never
be removed, hidden or become unreadable.
•
Except for maintenance purposes, do not remove
safety devices, shields, protection cases, etc.
Should their removal be necessary, stop the
engine, remove them with the greatest care and
always remember to refit them before starting the
engine and using the machine again.
•
Before any maintenance or repair work, stop the
engine and disconnect the batteries.
•
Do not lubricate, clean or adjust moving parts.
32
GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
First Edition - Second Printing
•
Do not carry out operations manually when
specific tools are provided for this purpose.
•
Avoid the use of tools in bad condition or use in
an improper way i.e. pliers instead of adjustable
wrenches, etc.
•
Applying loads in different points of the attachment
holding plate is forbidden.
WARNING
Any intervention on the hydraulic circuit must be
carried out by authorised personnel.
The hydraulic circuit of this machine is fi tted
with pressure accumulators. You and others
could be seriously injured if accumulators are
not completely depressurized.
For this purpose, shut the engine down and step
on the brake pedal 8/10 times.
•
Before carrying out operations on hydraulic
lines under pressure or disconnecting hydraulic
components, ensure the relevant line has been
previously depressurised and does not contain
any hot fluid.
Do not empty catalytic mufflers or other vessels
•
containing burning materials without taking the
necessary precautions.
•
After any maintenance or repair work, make
sure that no tool, cloth or other object has been
left within machine compartments, fitted with
moving parts, or where suction and cooling air
circulates.
•
When working, do not give instructions or signs
to several people at the same time. Instructions
and signs must be given by one person only.
Part No. 57.0009.0540
Courtesy of Crane.Market
Advertisement
Table of Contents
