Maintenance; Introduction - Genie GTH-4013 SX Operator's Manual

First Edition - Second Printing
Observe and obey:
* The operator can only perform
t h e r o u t i n e m a i n t e n a n c e
operations envisaged in this
manual.
* S c h e d u l e d m a i n t e n a n c e
procedures shall be completed
by qualified technical personnel
according to the manufacturer's
specifications.
Maintenance symbol legend:
The following symbols are used in this manual
to help you understand better the instructions
provided. When one or more symbols appear at
the beginning of a maintenance procedure, they
indicate the following:
Indicates that tools are required to
perform the procedure.
Indicates that new parts are required
to perform the procedure.
Indicates that a cold engine is required
to perform the procedure.
SERVICE INTERVAL
Running-in ____________________________
Ordinary ______________________________
Indicates the time interval for the
maintenance jobs expressed in
working hours.
Part No. 57.0009.0540 GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX

INTRODUCTION

A thorough and regular maintenance keeps the
machine in a safe and efficient working condition.
For this reason, it is advisable to wash, grease and
service the machine properly, especially after having
worked under particular conditions (muddy or dusty
environments, heavy operations, etc.).
Always ensure all machine components are in good
condition. Check for oil leaks or loosening of guards,
and make sure that the safety devices are efficient.
In case of defects, find and rectify them before using
the machine again.
Not respecting the ordinary maintenance schedule
of this manual automatically voids TEREXLIFT
warranty.
NOTICE
For the engine maintenance, please refer to the
specifi c Operator handbook supplied with the
machine.
CAUTION
Before any maintenance or repair work, remove
the attachment.
Operator's Manual

Maintenance

97
Courtesy of Crane.Market