Auxiliary Drive Controls - Genie GTH-4013 SX Operator's Manual

First Edition - Second Printing

AUXILIARY DRIVE CONTROLS

31_Cab Heater Fan Switch
Three-position switch:
0 OFF
1 Low speed
2 High speed
30_Road Lights Switch
Three-position switch:
0 Lights OFF
1 Position lights ON (the
switch indicator lights up
partially).
2 Low beam ON (the switch
indicator fully lights up).
32_Air Condition Switch (OPTIONAL)
Two-position switch:
0 OFF
1 ON
29_Work Lights Switch (OPTIONAL)
Two-position switch:
0 Lights OFF
1 Lights ON
15_Cab Heater Control Cock
Located on the left side of the driving seat base.
• Turn the cock clockwise to switch off heated
air.
• Turn the cock counter-clockwise to switch
on the cab heater.
• Adjust the flow of heated air in the cab
operating the switch 31.
Part No. 57.0009.0540
B
GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
Controls And Instruments
25_Auxiliary Hydraulic Circuit (OPTIONAL)
Two-position switch. The pressure of this button
causes the switching of the hydraulic circuit for
the movement of the attachments equipped with
auxiliary lines:
0
B
1
The selector has a block to keep the switch pressed.
Before switching the selector to another position,
unlock control B at the top of the selector.
23_Mixing Bucket Switch (OPTIONAL)
Two-position switch. The pressure of this button
enables the hydraulic mixing bucket functioning.
0 Mixer OFF
1 Mixer ON
The selector has a block to keep the switch pressed.
Before switching the selector to another position,
unlock control B at the top of the selector.
22_Hydraulic Mixing Bucket Oil Direction Switch
(OPTIONAL)
Three-position switch. The pressure of this button
regulates the oil flow direction towards right or left.
2 Oil flow towards left
0 No oil to the mixing bucket
1 Oil flow towards right
Operator's Manual
Oil to the main circuit
Attachments hydraulic
circuit switching
51
Courtesy of Crane.Market