Working Clothes; Personal Protective Equipment; Hazards On The Jobsite - Genie GTH-4013 SX Operator's Manual

Hide thumbs Also See for GTH-4013 SX:
Table of Contents

Advertisement

Operator's Manual
Safety Precautions

WORKING CLOTHES

During work, but especially when maintaining or
repairing the machine, operators must wear suitable
protective clothing:
Overalls or any other comfortable garments.
Operators should not wear clothes with large
sleeves or objects that can get stuck in moving
parts of the machine.
Ear-protectors or equivalent equipment.
Protective helmet.
Protective gloves.
Working shoes.
Use only type-approved working clothing in good
condition.

PERSONAL PROTECTIVE EQUIPMENT

Under special working conditions, the following
personal protective equipment should be used:
Breathing set (or dust mask).
Goggles or facial masks.
30
GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
First Edition - Second Printing

HAZARDS ON THE JOBSITE

Always take into account the features of the job site
where you are going to work:
Always examine the working area and compare
it with the machine dimensions in the different
configurations.
DANGER
The machine is not electrically insulated and
does not provide protection from contact with
or proximity to electrical power lines.
Always keep at a minimum safe distance from
the telescopic boom and the lifted load. Electrical
hazards!
Keep away from the machine in case of contact
with energized power lines. Personnel on the
ground must never touch or operate the machine
until energized power lines are shut off.
DEATH OR INJURY CAN RESULT FROM
CONTACTING ELECTRIC POWER LINES.
ALWAYS CONTACT THE ELECTRIC POWER LINES
OWNER. THE ELECTRIC POWER SHALL BE
DISCONNECTED OR THE POWER LINES MOVED
OR INSULATED BEFORE MACHINE OPERATIONS
BEGIN
POWER LINE VOLTAGE REQUIRED CLEARANCE
0 to
50 kV
50 to
200 kV
200 to
350 kV
350 to
500 kV
500 to
750 kV
750 to
1000 kV
DANGER
Do not at any time use the machine during a
storm.
WARNING
Operator have to survey his/her fi eld of vision
when operating the truck.
10 ft
3.00 m
15 ft
4.60 m
20 ft
6.10 m
25 ft
7.62 m
35 ft
10.67 m
45 ft
13.72 m
Part No. 57.0009.0540
Courtesy of Crane.Market

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gth-4017 sxGth-4017 exGth-4013 ex

Table of Contents