Engine Air Filter - Genie GTH-4013 SX Operator's Manual

Operator's Manual
Maintenance

ENGINE AIR FILTER

Clean the engine air filter and replace the elements,
when necessary.
1 Cleaning and changing the external element
- Shut the engine down and put the parking
brake.
- Open the four latches A.
- Remove the protection cap B.
- Extract the external cartridge C.
- Clean the filter bowl.
- Beat the cartridge against a piece of wood
surface to eliminate any dust.
- Dry clean the cartridge (max. pressure: 6
bar).
- Check for cracks in the filtering element.
- Before refitting the cleaned cartridge or a new
one, smear its seal with a thin coat of grease;
fit the cartridge and make sure it is properly
positioned.
- Refit cap A.
NOTICE
As soon as the warning lamp 37 on the cab
dashboard switches on, replace the outer
element.
Never wash the cartridge with water or solvents.
2 Changing the internal element
- See step 1 for removing the outer element.
- Extract the internal cartridge D.
- Clean the filter bowl.
- Smear the seal with grease, then mount the
new element and make sure it is correctly
positioned.
- Refit the main filter and the cap as described
in point 1.
104 GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
First Edition - Second Printing
NOTICE
The inner element should be replaced every two
times the outer element is replaced.
Never wash the cartridge with water or solvents.

SERVICE INTERVAL
Running-in _____________________________ None
Cleaning _____________________ Every
Outer element change __________ Every
Inner element change ________ Every
10
hours
500
hours
1000
hours
Part No. 57.0009.0540
Courtesy of Crane.Market