Table of Contents
Advertisement
First Edition - Second Printing
ADJUSTING THE MIRRORS
The machine is fitted with five mirrors:
•
The right convex mirror
special supporting bracket in advanced position
and allows checking the area
machine, on the right-hand side. To adjust its
position, manually rotate the joint it is fitted with.
•
The right rear view mirror
special supporting bracket and allows checking
the carriageway
adjust its position, manually rotate the joint it is
fitted with.
•
The left rear view mirror
left upper post of the windscreen and allows
checking the area
DANGER
Modifi cation of the telehandler may affect the
operator's visibility.
Part No. 57.0009.0540
is located on a
behind the
is located on a
behind the machine. To
is placed on the
behind the machine, on the
GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
Operating Instructions
left- hand side. To adjust its position, manually
rotate the joint it is fitted with.
•
The rear convex mirror
special bracket located at the back of the boom
and allows checking the area
machine as well as the rear part of the chassis.
To adjust its position, manually rotate the joint
it is fitted with.
•
The front left convex mirror
special supporting bracket in advanced position
and allows checking the area
machine, on the right-hand side. To adjust its
position, manually rotate the joint it is fitted with.
Operator's Manual
is placed on a
behind the
is located on a
in front of the
79
Courtesy of Crane.Market
Advertisement
Table of Contents
