Machine Specifications - Genie S-40 Service Manual

October 2013

Machine Specifications

S-40 and S-45 Models
Tires and wheels
Tire size, 2WD
front tires only
rear tires only
Tire size,
2WDRT & 4WD front & rear
Tire weight, new foam-filled (minimum)
(Rough terrain)
Tire ply rating
Tire contact area
Overall tire diameter
Tire pressure
(Rough terrain)
Tire pressure
(Rough terrain)
Wheel diameter
Wheel width
Wheel lugs
Lug nut torque - Drive and 9-bolt non-drive hubs
Lug nut, dry
Lug nut, lubricated
Lug nut torque - 8-bolt non-drive spindles
Lug nut, dry
Lug nut, lubricated
Part No. 102521
12.5L-16SL
12-16.5 NHS
12-16.5 NHS
300 lbs
136 kg
12
88 sq in 57 sq in
568 sq cm 368 sq cm
33.7 in 33.2 in
85.6 cm 84.3 cm
45 psi 45 psi
3.1 bar 3.1 bar
60 psi 60 psi
4.1 bar 4.1 bar
1
16 in 16 / in
2
40.6 cm 41.9 cm
3
10 in 9 / in
4
25.4 cm 24.8 cm
5 5
8@ / -18 9@ / -18
8 8
230 ft-lbs
312 Nm
170 ft-lbs
230 Nm
170 ft-lbs
230 Nm
130 ft-lbs
176 Nm
S-40 • S-45
Specifications
Track Components, TRAX option
Track material
Weight, assembly (each)
Fluid capacities
Fuel tank
Fuel tank, Option
LPG tank
8
Hydraulic tank
Hydraulic system
(including tank)
Drive hub
(before serial number 7569)
Drive hub
(from serial number 7569 to 15677)
Drive hub
(from serial number 15678)
Turntable rotation
drive hub
Drive hub oil type:
SAE 90 multipurpose hypoid gear oil API service
classification GL5
For operational specifications, refer to the
Operator's Manual.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice.
Section 2 • Specifications
Rubber
480 lbs
218 kg
20 gallons
75.7 liters
30 gallons
114 liters
33.5 pounds
15.2 kg
45 gallons
170 liters
55 gallons
208 liters
17 fl oz
0.5 liters
24 fl oz
0.71 liters
20 fl oz
0.6 liters
8 fl oz
0.24 liters
2 - 1