Control Lever For Ex - Genie GTH-4013 SX Operator's Manual

First Edition - Second Printing

CONTROL LEVER FOR EX

The handlers are equipped with a multipurpose
electro-proportional joystick 11 which allows
operating all the machine movements.
When shifted to one of the four directions (right/
left, forward/backward) it controls the boom lifting/
lowering and the forward/back pitching .of the
attachment frame.
Moving the roller 2 or pressing the button 1 you can
make all the boom movements.
Seize the control lever correctly and move it
gently.
The motion speed of the actuators depends on
the lever position: a small motion results in a
slow motion of the actuators; vice versa, a full
range motion of the lever corresponds to the
max. speed of the actuator.
CAUTION
The control lever shall be operated only when the
operator is correctly seated in the driving place.
DANGER
Before operating the control lever, make sure
that nobody is within the working range of the
machine.
Part No. 57.0009.0540 GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
Controls And Instruments
2
Operator's Manual
1
61
Courtesy of Crane.Market