Turn Signals - Windscreen Wiper - Lights - Genie GTH-4013 SX Operator's Manual

Operator's Manual
Controls And Instruments

TURN SIGNALS - WINDSCREEN WIPER - LIGHTS

Windscreen Washer Function:
Push the second stage of the lever along its axis to
direct a jet of water onto the cab windscreen.
Windscreen Wiper Function:
To operate the windscreen wiper, rotate the lever tip
to one of the four positions:
--- Intermittence
0 Wiper OFF
I Low speed
I I High speed
48 GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX
---
---
---
First Edition - Second Printing
Lights Function:
To switch the handler lights, lever can be set to three
different positions along its vertical axis:
0 low beam ON, stable condition
1 high beam ON, stable condition
2 high beam used for intermittent signalling;
when released, the lever springs back to
position 0.
Turn Signals Function:
Set lever to pos. 1 to indicate a turn leftwards or to
pos. 2 to indicate a turn rightwards.
---
---
Part No. 57.0009.0540
Courtesy of Crane.Market