Perform Engine Maintenance; Inspect The Engine Air Filter - Genie GS-2668 RT Service Manual

November 2008
REV B
A-4

Perform Engine Maintenance

Engine specifications require that this procedure
be performed every 8 hours or daily, whichever
comes first.
Required maintenance procedures and additional
engine information is available in the
Kubota D1105 Operator's Manual
(Kubota part number 16622-89166) OR the
Kubota D905 Operator's Manual
(Kubota part number 16622-8916-5) OR the
Kubota DF752 Operator's Manual
(Kubota part number EG601-8916-1) OR the
Perkins 403D-11 User's Handbook
(Perkins part number SEBU8311-01) OR the
Perkins 403C-11 User's Handbook
(Perkins part number 100816460).
Kubota D1105 Operator's Manual
Genie part number
Kubota D905 Operator's Manual
Genie part number
Kubota DF752 Operator's Manual
Genie part number
Perkins 403D-11 User's Handbook
Genie part number
Perkins 403C-11 User's Handbook
Genie part number
Part No. 112657
Section 3 • Scheduled Maintenance Procedures
A-5

Inspect the Engine Air Filter

Genie specifications require that this procedure be
performed every 40 hours or weekly, whichever
comes first.
Maintaining the engine air filter in good condition is
essential to good engine performance and service
life. Failure to perform this procedure can lead to
poor engine performance and component damage.
1 Kubota D1105 and D905 models: Pull up on
the engine tray locking pin, located under the
radiator on the engine pivot tray. Swing the
engine pivot tray out and away from the
machine for access.
2 Kubota D1105 and D905 models: Remove the
wingnut securing the end cap to the air cleaner
canister. Remove the end cap.
All other models: Disconnect the retaining
131379
clamps securing the end cap to the air cleaner
canister. Remove the end cap.
3 Remove the air filter element.
84240
4 Clean the inside of the air filter canister and the
canister gasket with a damp cloth.
84250
5 Inspect for and remove any blockage or debris
from the intake air passages.
131661
97360
GS-2668 RT • GS-3268 RT
CHECKLIST A PROCEDURES
3 - 9