Mitsubishi Electric MR-JE-C Series Instruction Manual page 130

7. OBJECT DICTIONARY
(c) Saving the multi axis waveform data
1) After connecting the target axis (servo amplifier) and MR Configurator2 with a USB cable, click
"Reread" to read the measurement data. Save the read data.
2) Perform the above operation on all other target axes (servo amplifiers) to save the measurement
data.
Personal computer
"Save As..."
Axes_to_be_measured1.gpf2
Axes_to_be_measured2.gpf2
Axes_to_be_measured3.gpf2
Axes_to_be_measuredN.gpf2
(d) Displaying the multi axis waveform data
1) Import the data measured on multiple axes to register in the history list of "History Management"
display.
Click "Import" in the "File" tab or in the "Graph" menu to select files to read.
"Reread" command
Servo amplifier
Transfer of the
measurement data
The axes to be
measured 1
POINT
The waveform data with different measuring conditions cannot be added to the
history list on the "History Management" display.
Set a value equal to or less than 10 Div for the numbers of waveform collection
Div. The waveform data with a value exceeding 10 Div cannot be read properly
at execution of "Reread".
A maximum of 20 items can be added to the history list by importing. If the
history list exceeded 20 items, delete the old ones.
Saving data in CSV format on MR Configurator2 enables the data to be edited
manually in Excel.
Servo amplifier
The axes to be The axes to be
measured 2
Import
An imported file is added at the end
of the displayed data.
7 - 51
Servo amplifier
The axes to be
measured 3
Servo amplifier
measured N