Mitsubishi Electric MR-JE-C Series Instruction Manual page 117

7. OBJECT DICTIONARY
(7) Bit definition of control DI 7
Bit Symbol
0 The value at reading is undefined. Set "0" when writing.
1
2
3
Manual pulse generator multiplication 1
Select a multiplication of the manual pulse generator in accordance with the combination with C_TP1.
When a multiplication is not selected, the value set in [Pr. PT03] is enabled.
This bit can be used on the servo amplifiers with software version A4 or later.
4 C_TP0
Manual pulse generator multiplication 2
5 C_TP1 Refer to C_TP0 for details.
This bit can be used on the servo amplifiers with software version A4 or later.
6 The value at reading is undefined. Set "0" when writing.
Analog override selection
7 C_OVR Turning C_OVR on enables VC (Analog override).
This bit can be used on the servo amplifiers with software version A4 or later.
8 The value at reading is undefined. Set "0" when writing.
9
10
11
12
13
14
15
Device (Note)
C_TP0 C_TP1
0 0
0 1
1 0
1 1
Note. 0: Off, 1: On
Description
Manual pulse generator multiplication
[Pr. PT03] setting value
7 - 38
× 1
10 times
100 times