Pump Leak Rate Test
Introduction
The Pump Leak Rate Test is used for verifying the internal tightness of the pump
and helps identifying parts which may have caused a leak.
Minimum firmware revisions:
• D.07.01
Running the Test
Parts required
p/n
5043-0277
1 Select the Pump Leak Rate Test from the Test Selection menu.
2 Start the test and follow the instructions.
Make sure to release the pressure by slowly opening the purge valve when the test has
N O T E
finished.
InfinityLab LC Series 1260 Infinity II Binary Pump User Manual
Description
Plug Black Long 10-32
Test Functions and Calibration
Pump Leak Rate Test
7
107