Agilent Technologies 1260 Infinity II User Manual page 149

5
Disconnect the valve cable from the internal connection
socket by pressing the fixing clip through the left side
middle hole with the screwdriver.
7
Bend the cable at the connector of the new valve.
9
Exchange the defective solvent selection valve.
InfinityLab LC Series 1260 Infinity II Binary Pump User Manual
Exchange the Solvent Selection Valve
6
Completely remove the old valve.
8
Guide the cable and connector into the hole and push
the connector into the socket.
10
Tighten the screws of the valve holder.
8
Maintenance
149