Electrical Connections - Agilent Technologies 1260 Infinity II User Manual

Electrical Connections

• The CAN bus is a serial bus with high-speed data transfer. The two
• The ERI/REMOTE connector may be used in combination with other
• With the appropriate software, the LAN connector may be used to control
• With the appropriate software, the USB connector may be used to control
• The power input socket accepts a line voltage of 100 – 240 VAC ± 10 % with
Never use cables other than the ones supplied by Agilent Technologies to ensure proper
N O T E
functionality and compliance with safety or EMC regulations.
InfinityLab LC Series 1260 Infinity II Binary Pump User Manual
connectors for the CAN bus are used for internal module data transfer and
synchronization.
analytical instruments from Agilent Technologies if you want to use
features such as start, stop, common shutdown, prepare, and so on.
the module from a computer through a LAN connection. This connector is
activated and can be configured with the configuration switch.
the module from a computer through a USB connection.
a line frequency of 50 or 60 Hz. Maximum power consumption varies by
module. There is no voltage selector on your module because the power
supply has wide-ranging capability. There are no externally accessible fuses
because automatic electronic fuses are implemented in the power supply.
Hardware Information

Electrical Connections

11
187