Saving A Project; Exporting A Project; Importing A Project - Omron ZW-7000 Series User Manual

2-8 Saving a project

Saving a project

Save the project being edited with the PC tool.
The project to be saved has the following information.
Configuration data
Project information
Entire sensor information
Tool setting information
Note
3-2 Switching operation modes p.90
Important
• Save a project data when the setting of the Sensor Controller is changed. If the power is turned off without saving,
the changed setting is cleared.
Saving the Bank/System Settings p.165
1
Menu bar: Click [File] - [Save] to select.

Exporting a project

A project data (.smc) can be exported.
The exported data can be used by importing with the other personal computer's PC tool.
1
Menu bar: Click [File

Importing a project

The exported data from other personal computers can be imported as project data.
1
Menu bar: Click [File
86
Saving a project
Description
Information on the sensor registered in this project.
Entire sensor information.
Information on tool setting parameters for each sensor registered in this project.
] - [ Export ] to select.
] - [ ]
Import to select.
ZW-7000/5000
User's Manual