Setting the System Environment
Set the system environment.
Saving setup data
Bank settings and system settings are saved internally on the Sensor Controller.
• The settings of all banks are saved regardless of the currently selected bank No.
• After you have made or changed settings, be sure to save the setup data. All settings will be deleted if
you turn the power OFF without saving the data. A message prompting you to save data will be dis-
played if you change a mode without saving data after you have changed settings.
FUN Mode-[SYSTEM]-[SAVE]
Setting
OK
CANCEL
Initializing setup data
Return all bank settings and system settings to their factory settings.
The settings of all banks and system settings are initialized regardless of the currently selected bank No.
FUN Mode-[SYSTEM]-[INIT]
Setting
OK
CANCEL
Saves the setup data.
Does not save the setup data.
Initializes the setup data.
Does not initialize the setup data.
Setting the System Environment
Description
Description
Section 3
ZS-L
3-35
User's Manual