Omron ZW-7000 Series User Manual page 166

Setting the Number of Digits Displayed Past the Decimal Point
Set the number of digits displayed past the decimal point for when numerical values are displayed on the main
display and sub-display of the Sensor Controller.
Item Setting item
Sensor settings The number of decimal
places
1
Set the operating mode to the FUNC mode.
3-2 Switching operation modes p.90
 Multi View Explore
→ Edit pane
2
Select the number of digits displayed past
the decimal point from [The number of
decimal places].
You can select from the above setting values.
164
Setting the System
Setting value
0 Digit to 5 Digit
(default value: 4 Digits)
: [System] (double-click)
: [Sensor Settings] icon (
Description
Set the number of digits displayed past the decimal point for
when numerical values are displayed on the Sensor
Controller.
)
ZW-7000/5000
User's Manual