Omron ZW-7000 Series User Manual page 67

- Do not apply any twisting stress to the fiber cable.
- Do not forcefully insert, or bend, or twist in a manner that would cause stress on the fiber connector when
connecting it.
- Do not let bending cause stress at the root section of a fiber connector and connection.
• External fiber cable has the direction. Make sure to connect the name plate side to the Sensor Controller.
• When connect in the opposite direction, can not be transfer the optical signal and the correctly measurement.
• If you connect having fiber connector, cannot be connected correctly.
• Additionally, if force to connect the standard fiber cable and extension fiber cable in the opposite direction, it may be
caused failure.
• For how to use the supplied strap, refer to the following; Reference mark p.26.
Important
• The connection adapter (ZW-XFCM) comes packed together with the extension fiber cable (ZW-XF70
• Never use any extension fiber cable and/or connecting adapter other than those specified in the above.
• Only one fiber cable is allowed to extend the normal fiber cable. Never use two or more extension fiber cable
connected together.
• Do not touch the fiber cable face of the Sensor Head. It may cause a degrading of its efficiency.
If you mistakenly touch or otherwise get dirt on the face, lightly wipe off the part using the following:
-Optional item ZW-XCL
-Commercially available fiber cleaner
-A dry, soft cloth.
Do not use a cloth dampened with alcohol.
It may be occur the re-adhesion of dirt.
• For cleaning the fiber connector of the Sensor Controller, use the optional item ZW-XCL or a commercially available
fiber cleaner.
• If the Sensor Head is frequently inserted and removed, the following commercially available fiber cleaners are
recommended for repeated use.
l
ZW-7000 Series
Product name Model
NEOCLEAN-M ATC-NE-M1
l
ZW-5000 Series
Product name Model
OPTIPOP R1 ATC-RE-01
• Contact
[Request for an Estimate]
URL http://www.ntt-at.com/product/optical_cleaner/Distributors.html
[Technical and other inquiries]
Company NTT Advanced Technology Corporation
Address Muza Kawasaki Central Tower, 1310
Omiya-cho Saiwai-ku, Kawasaki-shi,
Kanagawa, 212-0014, Japan
TEL +81 44 589 5894
URL http://www.ntt-at.com/product/optical_cleaner/Distributors.html
• When you remove the fiber cable from Sensor Controller, make sure to attach the protective cap. If you do not
attach it, it is possible that some contaminants may have adhered and may cause degradation of performance.
• Calibrate the Sensor Head after removing and inserting an optical fiber.
Calibrating Sensor Head p.66
ZW-7000/5000
User's Manual
Manufacture
NTT Advanced Technology Corporation
Manufacture
NTT Advanced Technology Corporation
@@
R).
65
Installation