Installing on bottom
The following describes how to attach the Sensor Controller on its bottom.
1
Drill four installation holes on the base.
Important
For the location installation holes, see the external
dimensions.
9-1 Specifications and External Dimensions
p.260
2
Tighten four M4 screws to fix the Sensor Controller
on the base.
Tightening torque: 1.2 N • m
Sensor Controller thread depth: 6 mm
Attaching the strap to the Calibration ROM
1
Attach the supplied strap to the calibration ROM.
2
Attach the calibration ROM to the Sensor Head.
l
ZW-7000 Series
54
Installation
M4 screw × 4
Strap
l
ZW-5000 Series
Calibration ROM
ZW-7000/5000
User's Manual