Omron ZW-7000 Series User Manual page 150

Item Setting item
Trigger Trigger level
Settings
Trigger hysteresis 0 to 999.999999 [mm]
 Multi View Explore
→ Edit pane
→ Task Settings window : [Hold]
1
Set the hold mode.
Setting the Hold Mode p.144
2
Select the trigger method from [Trigger
method].
3
Enter [Trigger level] and [Trigger hysteresis]
when [Selfup trigger] or [Selfdown trigger]
are selected at [Trigger method].
Important
Set "Trigger hysteresis" according to the fluctuation of the measured value near the trigger level. Hysteresis is applied
simultaneously with start of measurement to prevent chattering of the TIMING input.
Note
The trigger can also be set by the operating keys on the Sensor Controller.
Setting Triggers p.226
148
Setting the Output Conditions
Setting value Description
-999.999999 to 999.999999 Set the self-trigger level when [SELF-UP] or [SELF-DOWN] are selected at
[mm] [Trigger method].
(default value: 0)
Set the hysteresis width for the self-trigger when [SELF-UP] or [SELF-
(default value: 0.05% of DOWN] are selected at [Trigger method].
measuring range)
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon ( )
ZW-7000/5000
User's Manual