Omron ZW-7000 Series User Manual page 156

Setting the Zero Reset Type
Set the zero reset type.
Item Setting item
Zero reset Type
 Multi View Explore
→ Edit pane
→ Task Settings window : [Zero reset]
1
Set [Status] to ON.
Setting the Status p.152
Important
The zero reset type can be set only when [Status]
is set to ON.
2
Select the zero reset type from [Type].
Note
The zero reset type can also be set by the operating keys on the Sensor Controller.
Setting the Zero Reset Mode p.232
154
Setting the Output Conditions
Setting value Description
Real value Sets the measured value when a zero reset is executed to zero.
Sensor head
Zero reset
Hold value Sets the measured value (hold value) when a zero reset is executed to zero.
This is enabled when hold measurement is performed.
Sensor head
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Measurement of height
from reference surface
Reference A
Hold A
(reference)
Zero reset
Direction of movement
)
Measurement of height
from reference surface
ZW-7000/5000
User's Manual