3-5 Displaying measured values in graphs
The measured values can be displayed in graphs.
Important
This function can only be used with project of the displacement sensor (ZW).
With project of the controller (NJ), you can use the "Data trace" function to display graphs of measured values.
Allowable setting range of sampling interval is 500 µs to 100 ms.
If the sampling interval is short, can miss the measurement value depending on the loaded condition.
Multi View Explore
→ Edit pane
→ Online setting window : [Monitoring]-[Trend monitor start]
1
Click [Trend monitor start].
The Trend Monitor window starts up.
2
Add the data to monitor the trend for.
Add the data to monitor the trend for to the list.
Click the logging target data display icon (
to add to the list of data to be logged.
Click the add target icon (
A new target data line is added.
Note
To delete target data from the list, select the line with the data to be deleted, then click the [Delete].
The maximum number to add the list is 20.
ZW-7000/5000
User's Manual
: [(ZW model name)] (double click)
: [Online] icon (
)
)
)
Displaying measured values in graphs
95