Attaching The Strap To Protective Cap; Connection Of Fiber Cable And Calibration Rom - Omron ZW-7000 Series User Manual

Attaching the Strap to Protective Cap

1
Attach the supplied strap to the protective cap.
l
ZW-7000 Series
Important
• When attaching the protective cap with its strap to the fiber cable, be careful so as the protective cap or strap do not
catch when you thread it.
• When removing the fiber cable from the Controller, make sure its protective cap is attached.
Leaving the cable unprotected can let dirt get on the end surface and cause performance deterioration.
• When you remove the protective cap of fiber connector, keep the protective cap using optional strap.

Connection of Fiber Cable and Calibration ROM

Connect the fiber connector of Sensor Head to the fiber adapter of Sensor Controller.
1
Remove the Protective cap of Fiber cable.
l
ZW-7000 Series
ZW-7000/5000
User's Manual
l
ZW-5000 Series
55
Installation