Omron ZW-7000 Series User Manual page 66

l ZW-5000 Series
Extension fiber cable (option)
Model
ZW-XF5002R
ZW-XF5005R
ZW-XF5010R
ZW-XF5020R
ZW-XF5030R
Connecting adapter (option)
Model
ZW-XFC2
Important
• Handling fiber cables
Use them in compliance with the following. This may result in damage to the fiber cable.
- Fiber cable bend radiuses must be at least 20 mm.
- Do not yank hard on a fiber cable.
- Do not step on a fiber cable or place anything heavy on it.
64
Installation
Sensor Head
fiber cable
Mate the convex section of the fiber cable with the groove
on the connection adapter and turn the threaded section
clockwise while pushing in.
Convex section
In the "No good" status in figure below, optic signals cannot
be transmitted and correct measurement is not possible.
Always check that the system is in the "Good" status.
Length
2 m
5 m
10m
20m
30m
Connection adaptor
ZW-XFC2
Extension fiber cable
ZW-XF50@@R：
（2m/5m/10m/20m/30m）
Groove
ZW-7000/5000
User's Manual