Functions And Operations During Measurement; Switching The Run (Run) Mode Display - Omron ZW-7000 Series User Manual

7-5 Functions and Operations during Measurement

Switching the RUN (Run) Mode Display

In the RUN mode, you can switch the measured value display by pressing the
You can check the threshold value and analog output value while displaying the measured value on the main display.
Amount of emitted
light
H unlit L unlit
Displayed Task for
displayed target
H unlit L unlit
Tag link status
H unlit L unlit
LOW threshold value
H unlit L lit
The above display screenshots are only samples and may different from actual displays.
(Note 2) An output item not selected on the analog output (Voltage output/Current output) is displayed as "------
" on the sub-display. For example, if "Voltage output" is selected on the analog output, the analog
current output value is displayed as "------" on the sub-display.
(Note 3) "Displayed task" can be selected from TASK1 to TASK4. "Task for displayed target" is displayed as "dTASK
@
indicates the task number. (Refer to p.204 for the task for displayed target.) ) If the task for displayed
target is TASK2, for example, "TASK1," "dTASK2," "TASK3" and "TASK4" will be displayed.
ZW-7000/5000
User's Manual
Distance
H unlit L unlit
（Note 2）
Displayed Task for
displayed target
H unlit L unlit
Internal logging status
H unlit L unlit
Analog voltage
output value
H unlit L unlit

Functions and Operations during Measurement

/ keys during the operation.
Distance
H unlit L unlit
Online status
H unlit L unlit
Amount of light
received
H unlit L unlit
（Note 3）
Analog current
output value
H unlit L unlit
Tag link status
H unlit L unlit
HIGH threshold value
H lit L unlit
Judgment result
H unlit L unlit
Resolution
H unlit L unlit
@
."
201