Setting The Measurement Area - Omron ZW-7000 Series User Manual

Setting the Measurement Area

Setting the Measurement Area p.122
As an example, here is an explanation of the procedure for selecting "2 area mode" for area mode setting.
Operating procedure
Steps Key operation
1
2
3
4
5
210
Setting Sensing
Display Description
Press and hold the
mode.
Press the
Press the
the
Set the Area mode.
1.MODE: 1 Area mode
2.MODE: 2 Area mode
Current setting value is displayed on the sub-display.
Press
In this example, select "2.MODE" and press the
Press the
To save the setting, refer to "7-2 Functions of Operating Keys"
(p.197).
key for two seconds to enter the FUNC
/ keys to select "SENS" and press the
/ keys to select "REG.MODE" and press
key.
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
key.
key.
ZW-7000/5000
User's Manual