Setting Scaling - Omron ZW-7000 Series User Manual

Setting Scaling

Performing Manual Scaling
Performing Manual Scaling p.130
As an example, here is an explanation of the procedure for setting the manual scaling type to "SPAN" and the
inclination coefficient to "1.2".
Operating procedure
Steps Key operation
1
2
3
4
5
6
7
8
9
ZW-7000/5000
User's Manual
Display Description
Press the
Press the
key.
Press the
key.
Press the
key.
Press the
key.
Select "MANUAL" as the scaling type.
The current setting value is displayed on the sub-display.
Press the
display blinks.
Select "MANUAL" and press the
Set the manual scaling type.
SPAN: Span
OFFSET: Offset
In this example, press the
the
Set the inclination coefficient.
The current setting value is displayed on the sub-display.
Press the
blinks.
To edit numerical values, use the
In this example, select "1.2" and press the
Press the
key for two seconds to enter the FUNC mode.
/ keys to select "MEAS" and press the
/ keys to select "TASK 1" and press the
/ keys to select "OUTPUT" and press the
/ keys to select "SCALE" and press the
/ keys to enter the editing mode, and the sub-
key.
/ keys, select "SPAN" and press
key.
key to enter the editing mode, and the sub-display
/ /
key for two seconds to enter the RUN mode.
Setting the Output Conditions
/ keys.
key.
221