Debug Platform Frontend-Controller - Cisco WS-C3560E-24PD-E Command Reference Manual

debug platform frontend-controller

debug platform frontend-controller
Use the debug platform frontend-controller privileged EXEC command to enable debugging of
front-end controller activity. Use the no form of this command to disable debugging.
Syntax Description
all
image
led
manager
poe
register
thermal
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(20)SE3
Usage Guidelines This command is only supported on Catalyst 3560G-48TS, 3560G-48PS, 3560G-24TS, and
3560G-24PS switches.
The undebug platform frontend-controller command is the same as the no debug platform
frontend-controller command.
Catalyst 3560 Switch Command Reference
B-38
debug platform frontend-controller {all | image | led | manager | poe | register | thermal}
no debug platform frontend-controller {all | image | led | manager | poe | register | thermal}
Display all the debug messages for front-end controller.
Display Image Manager debug messages.
Display LED debug messages.
Display front-end-controller manager debug messages.
Display Power over Ethernet (PoE) debug messages.
Display Register Access debug messages.
Display thermal debug messages.
Modification
This command was introduced.
Appendix B Catalyst 3560 Switch Debug Commands
78-16405-05