Table of Contents
Advertisement
CDM-625 Advanced Satellite Modem
Remote Control
Command
Parameter
Number of
(Instruction
Type
Arguments
& Qualifier)
Faults and
Status...
Description of Arguments
c = Rx Traffic status:
0=Rx Traffic OK
1=Demodulator unlocked
2=AGC Alarm - signal out of range
3=Demux Lock (Frame SYNC)
4=Spare
5=Buffer Slip
6=AIS detected on incoming data
7=Eb/No alarm
8=Buffer Clock activity
9=LNB summary alarm (if ALA enabled)
A= QDI Deframer Unlocked
(Exception 600L: 9=LNB current, A=LNB voltage)
d = Open Network:
0=No Faults
1=Loss of Tx frame
2=BER Alarm
3=Loss of Tx multiframe
4=Tx signaling AIS
5=Tx Remote alarm
6=IBS satellite alarm
7=IDR Rx BWA1
8=IDR Rx BWA2
9=IDR Rx BWA3
A=IDR Rx BWA4
B=IDR Tx BWA1
C=IDR Tx BWA2
D=IDR Tx BWA3
E=IDR Tx BWA4
e = Change in modem fault status since last poll
0=unchanged
1=changed
f = Change in modem configuration since last poll
0=unchanged
1=changed
D–52
Revision 1
MN-0000036 (Ref MN/CDM625.IOM)
Query
Response to
(Instruction &
Response to Query
Command
Qualifier)
Advertisement
Table of Contents
