Comtech EF Data CDM-625 Installation And Operation Manual page 285

CDM-625 Advanced Satellite Modem
Remote Control
Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
Circuit ID CID= 40 bytes
String
RTC Date DAY= 6 bytes
RTC Time TIM= 6 bytes
EDMAC EFM= 1 byte, 0 or 1
Framing Mode
Description of Arguments
Command or Query.
Sets or queries the user-defined Circuit ID string, which is a fixed
length of 40 characters.
Valid characters include:
Space ( ) * + – , . / 0 9 and A thru Z
Command or Query.
A date in the form ddmmyy (international format), where
dd = day of the month (01 to 31)
mm = month (01 to 12)
yy = year (00 to 99)
Example: DAY=240457 (April 24, 2057)
Command or Query.
A time in the form hhmmss, indicating the time from midnight,
where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours:12 minutes:59 seconds)
Command or Query.
EDMAC mode, where:
0=EDMAC OFF (Idle Mode)
1=EDMAC ON (Master Mode)
2=EDMAC ON (Slave Mode, Query Only)
Example: EFM=1 (EDMAC Enabled as Master)
D–25
MN-0000036 (Ref MN/CDM625.IOM)
Query
Response to
(Instruction Response to Query
Command
& Qualifier)
CID= CID? CID=x
CID? (see description of
arguments)
CID*
CID#
DAY= DAY? DAY=ddmmyy
DAY? (see description of
arguments)
DAY*
DAY#
TIM= TIM? TIM=hhmmss
TIM? (see description of
arguments)
TIM*
TIM#
EFM=
EFM? EFM=x
EFM? (see description of
arguments)
EFM*
EFM#
Revision 1