Table of Contents
Advertisement
CDM-625 Advanced Satellite Modem
Remote Control
Command
Parameter
Number of
(Instruction
Type
Arguments
& Qualifier)
Retrieve next
N/A
80 bytes
5 unread
Stored Events
Clear All
CAE=
None
Stored Events
Initialize the
IEP=
None
Stored Events
Pointer
Description of Arguments
Query only.
Unit returns the oldest 5 Stored Events which have not yet been
read over the remote control.
Reply format: [CR]sub-body[CR]sub-body[CR]sub-body[CR]sub-
body[CR]sub-body, where Sub-body=ABCddmmyyhhmmss,
A is the fault/clear indicator:
F=Fault
C=Clear
I=Info
B is the fault type where:
1=Unit
2=Rx Traffic
3=Tx Traffic
4=Info (Power on/off, or log cleared)
5=Open Network
6=BUC
7=LNB
C is Fault Code number, as in FLT? or Info Code, which may be:
0=Power Off
1=Power On
2=Log Cleared
3=Global Config Change
4=Redundancy Config Change
ddmmyy = date stamp.
hhmmss = time stamp.
If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros. If there are no new events, the
response is RNE*.
Command only.
Forces the software to clear the software events log.
Example: CAE=
Note: This command takes no arguments
Command only.
Resets internal pointer to allow RNE? queries to start at the
beginning of the stored events log.
D–30
MN-0000036 (Ref MN/CDM625.IOM)
Query
Response to
(Instruction
Response to Query
Command
& Qualifier)
N/A
RNE?
RNE=[CR]ABCddmmy
yhhmmss[CR]ABCddm
myyhhmmss[CR]ABCd
dmmyyhhmmss[CR]AB
Cddmmyyhhmmss[CR]
ABCddmmyyhhmmss
(see description for
details of arguments)
CAE=
N/A
N/A
CAE?
CAE*
CAE#
IEP=
N/A
N/A
IEP#
Revision 1
Advertisement
Table of Contents
