CDM-625 Advanced Satellite Modem
Front Panel Operation
5.7
SELECT: Info (Information)
Info: All ID
Drop
Select the information menu to view using the
Note: INFO screens display information on the current configuration of the modem without
risking inadvertent changes.
5.7.1
Info: All
All = Start
(Stop, Start)
This menu permits the user to view the configuration of the unit, in a step-by-step process, by
scrolling through each menu in succession. Us the
Start. Press ENTER to continue through all the configurations.
Note that this display is read-only. The user may only view the configurations - no editing is
possible.
To discontinue: Press CLEAR, use the
5.7.2
Info: ID
----A TEST MESSAGE TO SHOW CIRCUIT ID---
This displays the user-defined Circuit ID string (40 characters), which is entered via the menus:
Utility, Circuit ID. To return to the previous menu, press ENTER or CLEAR.
5.7.3
Info: Mode
Info:
An example of a Mode Information screen is shown above.
Mode
Tx
Insert
Remote
▲ ▼
Modem Circuit ID:
Mode:
Tx= G.703B:D&I
Rx= G.703B:IBS
5–53
MN-0000036 (Ref MN/CDM625.IOM)
Rx
Clocks EDMAC
Alarm-Mask
◄ ►
arrow keys, then press ENTER.
arrow keys to select between Stop and
▲ ▼
arrow keys to select Stop, then press ENTER.
(B8ZS)
(B8ZS)
Revision 1
Misc
(v)