Table of Contents
Advertisement
CDM-625 Advanced Satellite Modem
Ethernet Management
Unit Parameters
•
AGC (Automatic Gain Control): From the dropdown, select On or Off
•
Reference Oscillator Adjust: Enter a value from 0-255
•
Circuit ID: Enter a Circuit Identification name of up to 24 alphanumeric characters
•
Lock Mode: From the dropdown, select On or Off
Once the desired settings have been made on this page, the user should then click [Submit] as
needed in order to save those changes.
6.5.4.5.3
ODU | Status Page
Note: The appearance of the 'ODU | Status' page changes depending on which type of ODU had
been configured for operation with the CDM-625. These pages provide the user with read-only
status windows pertaining to the current operating condition for either the CSAT-5060 or the
KST-2000A/B ODUs.
6.5.4.5.3.1 ODU | Status Page (CSAT-5060)
Figure 6-20 shows the 'ODU | Status' page as it appears with the CSAT-5060 configured as the
ODU.
This page provides the user with a read-only status window pertaining to the ODU's Maintenance
Parameters; Alarms; and the number of Unread Events in the Events Log.
Figure 6-20. ODU | Status page (CSAT-5060)
MN-0000036 (Ref MN/CDM625.IOM)
6–29
Revision 1
Advertisement
Table of Contents
