Table of Contents
Advertisement
CDM-625 Advanced Satellite Modem
Front Panel Operation
5.4.7
CONFIG: Quad Drop & Insert (QDI)
Quad D&I (QDI):
Select Drop or Insert using the
5.4.7.1
CONFIG: Quad D&I
QDI Port[ch]:
This submenu shows information for all four ports of the Drop side and the cumulative Tx data
rate. Each port may be allocated between 0 and 32 channels, accumulating to no less than one
channel and no more than 32 channels. Select the port to edit using the
edit the number of channels for that port using the
calculated & displayed as the number of channels is edited. After pressing ENTER, a submenu
appears based on the port that the cursor had been on (where #X is the tributary port number):
QDI Drp-Ch:
Port#X
The display can only show up to 8 channels. If a
side, this means that there are more channels to view (beyond channel 8 as in this example). Use
the
►
arrow key to scroll across and view more.
Select a timeslot using the
then press ENTER when done.
5.4.7.2
CONFIG: Quad D&I
QDI Port[ch]:
This submenu shows information for all four ports of the Insert side and the cumulative Rx data
rate. Each port may be allocated between 0 and 32 channels, accumulating to no less than one
channel and no more than 32 channels. Select the port to edit using the
number of channels for that port using the
calculated & displayed.
After pressing ENTER, a submenu will appear, based on the port that the cursor had been on
(where #X is the tributary port number):
Drop
Insert
◄ ►
Drop:
1[09]
2[15]
1
2
TS: 01 02 03 04 11 12 13 14
◄ ►
arrow keys. Edit the timeslot value using the
Insert:
1[09]
2[15]
arrow keys, then press ENTER.
Drop
01536 kbps
3[00]
4[00]
arrow keys. The cumulative data rate is
▲ ▼
3
4
5
6
7
character is displayed at the top right-hand
>
Insert
01536 kbps
3[00]
4[00]
arrow keys. The cumulative data rate is
▲ ▼
5–28
MN-0000036 (Ref MN/CDM625.IOM)
(34)
(34v)
◄ ►
arrow keys, then
8
>
arrow keys,
▲ ▼
(34v)
◄ ►
arrow keys. Edit the
Revision 1
Advertisement
Table of Contents
