Comtech EF Data CDM-625 Installation And Operation Manual page 293

CDM-625 Advanced Satellite Modem
Remote Control
Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
IP Address IPA= 18 bytes
numerical
IP Gateway IPG= 15 bytes
numerical
Description of Arguments
Command or Query.
Used to set the IP Address and network prefix for the 10/100 Base T
Ethernet management port, in the format:
aaa.bbb.ccc.ddd.yy
Permitted ranges:
aaa 0-223
bbb 0-255
ccc 0-255
ddd 0-255, but they cannot all be zero.
yy is the network prefix (range: 8 to 31)
Other restrictions:
If aaa>191, prefix may not be less than 24.
If aaa>127, prefix may not be less than 16
Example: IPA=010.006.030.001.24
Command or Query.
Used to set the IP Gateway Address for the Ethernet management
port, with the format:
aaa.bbb.ccc.ddd
Permitted ranges:
aaa 0-223
bbb 0-255
ccc 0-255
ddd 0-255, but they cannot all be zero.
Example: IPG=010.006.030.001
D–33
MN-0000036 (Ref MN/CDM625.IOM)
Query
Response to
(Instruction Response to Query
Command
& Qualifier)
IPA= IPA? IPA=xxx.xxx.xxx.xxx.yy
IPA? (see description of
arguments)
IPA*
IPA#
IPG= IPG? IPG=xxx.xxx.xxx.xxx
IPG? (see description of
arguments)
IPG*
IPG#
Revision 1