Saving The Method - Agilent Technologies G1323B User Manual

Saving the Method

1 Select the Method button [F3] in the Analysis screen.
2 Select the Save As button [F8].
3 Enter the method name as DERIV using the selection keys (also see
4 Press the Done button [F6] to save the method.
5 Press the Esc key to return to the Analysis screen.
The injector program is now part of the method called DERIV and can be
started by selecting the Start button [F8] in the Analysis screen.
1200 Series Handheld Control Module Users's Guide
"Specifying a Method Name"
Running an Injector Program
on page 42)
12
Saving the Method
153