8
Using the Column Compartment
Tracking Column ID History
Tracking Column ID History
1 Select the Configure button [F4] in the System screen.
2 Select Column Comp from the list.
3 Press Enter to enter the Column Compartment Configuration screen.
4 Press the Column ID button [F2] to enter the Column ID screen.
If no column tag is sensed, the parameter entry fields are not active, the left/right tag sign
N O T E
is crossed out and the More ... button is unavailable.
By selecting the More ... button [F1] you can enter values and check a variety of
features for the installed column. For example, the maximum pressure allowed
and the maximum recommended temperature.
You can check the number of injections that have been made on the column.
110
1200 Series Handheld Control Module Users's Guide