Inserting And Removing Pc Cards - Agilent Technologies G1323B User Manual

2 Working with the Control Module

Inserting and Removing PC cards

Inserting and Removing PC cards

1 Insert the connecting side of the PC card into the PC card slot of the control
2 Switch to the Analysis, System or Sample screen, press the m key and select
3 To remove the PC card, press the card eject button on the left hand side of
The control module supports PCMCIA 2.0 type I and II memory cards. In general only cards
N O T E
up to a capacity of 128 MB are supported.
Compatible cards are:
• SanDisk CompactFlash Memory Cards (SDCFBx-yy) with SanDisk CompactFlash PC Card Adapter
• SanDisk Flash Disk PCMCIA/PC Card ATA (SDP3Bx-yy)
Card eject button
Figure 14
40
module until you feel it will not go in any further.
Restart to restart the control module.
the module.
(SDCF-yy)
Inserting and Removing the PC card
1200 Series Handheld Control Module Users's Guide