2
Working with the Control Module
General Functions
Adjusting View
Pressing the m key in the Analysis screen and selecting Setup view allows to
select the modules that will be displayed in the Analysis screen. Choosing this
option enables you to select the modules present in the Analysis screen. By
pressing the Remove/Add buttons [F7, F8] you can move the modules from the
Selected Modules to the Available Modules list boxes and vice versa,
depending on which module is highlighted.
Configuring the LC System
The LC system is self-configuring to a large extent. It recognizes automatically
which modules are installed. The layout of the Analysis screen changes
according to the modules present. You can use the Configure button [F2] in the
System screen to configure various features such as the Auto-on for the
system or Loading (a method), and After Error Condition.
If an error event occurs, you can configure the LC system to load a specified
method or turn off the LC system using the After Error Condition setting.
38
1200 Series Handheld Control Module Users's Guide