Agilent Technologies G1323B User Manual page 25

The Agilent 1200 Series Control Module 1
Control Module Software
The Start/Stop button [F8] starts or stops a single injection or a multiple
injection analysis.
The On/Off button [F7] turns the pump, detector lamp, heater and
thermostatted column on or off.
The Plot button [F6] provides direct access to the Plot screen where all
important parameters can be displayed graphically. It is possible to display
several parameters at the same time.
Using the m (menu) key in the Analysis screen prompts context sensitive
menus depending on the active parameter entry field (see Figure 3 on
page 20).
The Module Status on the top right hand side of the screen and on top of the
individual module tabs indicates whether the system/ module is ready or not.
indicates the system is ready, indicates the system/ module is not
ready, (only applicable for individual modules) indicates that a vital
error has occurred in the module.
The following diagram shows the functionality available in the Analysis screen
for an LC system comprising a pump, an autosampler, a thermostatted column
compartment and a detector (e.g. Variable Wavelength Detector, Diode Array
Detector, Multiple Wavelength Detector).
1200 Series Handheld Control Module Users's Guide 25